Measurement & Control equipment FLOMAG

ULS10

Ultrasonic level sensor

Technical Data

Ultrasonic level sensor is designed for level measurement of liquids in closed and open tanks and channels. It is used in potable and waste water plants, food and stuff industry, etc.

The sensor generates ultrasonic waves to the surface of the measured liquid. The ultrasonic waves reflect from the liquid surface and go back to the sensor.

Microprocessor measures the time from the ultrasonic pulse generation to receipt of reflected pulse. Microprocessor realizes automatic temperature correction of the ultrasonic speed, control of the received echo signal, correction of the amplification and adaptation to the dynamics of the process. The level of the liquid is calculated for set basic distance L0.

The information for the measured distance/level is transmitted to the current output and serial interface RS485.

Technical parameters

range 0,3 - 10 m
resolution 1 mm
accuracy ± 0,1 % from the measured distance ± 2 mm
operational frequency 70kHz
angle
material PE, PVC
temperature coefficient ± 0,03 %/ °C
temperature -20 ÷ 60 °C
relative humidity (5 ÷ 95 )%
protection IP68
current output 0 ÷20 mA ,or 4 ÷ 20 mA , or 0 ÷ 24 mA
digital output RS485
power supply 14 ÷ 26 VDC
power consumption max 100 mA
schema            LS10 dimensions

Attached files

Related products